Up next VOTW: Vermont Overland Trophy Published on November 30, 2017 Author Tread Staff Tags airing down, ARB EZ deflator, beadlock wheels, Share article Facebook 0 Twitter 0 Mail 0 Airing Down What is airing down? To the seasoned off-roader, the term is second nature and a rule always followed. To the newbie, it can be a technique unfamiliar. Pictured is the ARB EZ-Deflator to help read deflate tires with ease and gives ability to simultaneously read tire pressure. Airing down is the process of deflating your tires to a pre-determined, lower pressure. The method allows for the tire to stretch out and create a larger footprint. This larger footprint reduces the pressure from the weight of the vehicle on the ground, facilitating floatation and allowing the tire to mold itself around uneven surfaces on the ground. The bulging sidewalls also let the treaded sidewall portion of the tire assist in the tractive efforts, as well.There is no pre-determined pressure that suits all vehicles, so it will be a tailored fit based on vehicle weight, sidewall stiffness, and sidewall-to-rim ratio. Often the mid-teens is the sweet spot for lighter vehicles, and low 20s to high-teens for heavier ones. Caution must be used when airing down below these sweet spots, however, because the air pressure within the tire carcass is what is forcing the bead against the wheel. The more pressure that is removed from the tire, the less pressure is forcing itself against that bead. Without that seal, the tire bead can jump the lip of the wheel and lose all pressure. Some off-roaders counteract this issue by the use of beadlock wheels. The beadlock uses a clamping mechanism to mechanically secure the bead of the tire against the wheel. This allows for insurance that the tire bead will not separate in extreme scenarios. Subscribe to our weekly newsletter (As an Amazon Associate, Tread earns from qualifying purchases.)
How-To's Outdoor Adventures Drink or Die: Proven Water Purification Techniques There’s always a lot of gear to pack in case things go wrong when taking your off-roader out exploring mountains, deserts, or simply getting lost […] Adam Jones March 27, 2023
How-To's Gluing Metal with Metal The welder is one of those tools that, unless you are a fabricator, probably only gets used a handful of times a year. It is […] Tread Staff July 25, 2018
Department How-To's TRAILER TECH | Tips To Hauling and Securing Our Precious Toys Before heading to Easter Jeep Safari this year, I did a final walkaround of my car hauler, an 18-foot Big Tex with my Expedicion de […] Chris Collard November 09, 2023
Accessories How-To's Winter Weather Auto Prep: Tips, Tricks, and Upgrades The Mountains are Calling The dog days of summer are over; it’s time for winter weather auto prep. We’ve been cooped up for months because […] Mercedes Lilienthal January 06, 2021